RAT41

RAT41
  • RAT41
  • Info
  • Specifications
  • Drawings
  • Recommended Amplifier

Features


 ● Upgrade tier Class H, matching with the new generation mid-end SMPS product, the effect is 〉76%.

 ● Divided into three models with power ranging 650W/1200W/1800W at 8ohm loading, which satisfys the requirements of application projects.

 ● Extremely high power density: amplifier with height-2U/depth-17" of 16kg can provide 7600W continuous output power

 ● Stably drive speakers with 8ohm, 4ohm, and 2ohm loading, meeting requirements from line array to normal array application projects.

 ● Very low harmonic distortion(THD=0.1%)and the ideal frequency response performance(20~20kHz).

 ● Use audio-specfic components and connectors, ensuring higher reliability.

 ● Removable front panel, easy to clean and maintain.

 ● Adopt SMT, AI, ICT full-automatic production and testing technology to ensure the standardization of production and product consistency.

 ● Have perfect and intelligent protection such as overpressure, over-current, short circuit, over-temperature.

 ● DC, VHF, clip limiter, so as to prevent damage cause by man-made and environmental factors.


Application


 ● Large-scale live performance and fixed installation projects.

 ● Conference centers, high-end hotels, Disco and clubs etc.


ModelRAT41
Power
8Ω stereo *1300W×2
4Ω stereo *2300W×2
2Ω stereo **2800W×2
8Ω bridge *4600W
4Ω bridge **5600W
Other Specification
Frequency response20Hz-20kHz
THD+N<0.02%
S/N rate>95dB
Damping factor>280
Crosstalk>70dB
Slew rate>20V/μs
Input sensitivity0.775v / 1v / 32dB
Input impedance
(bal/unbal)
10kΩ/20kΩ
Voltage gain(8Ω)39.7dB
Output CircuitryClass I
CoolingAir flow from front to rear
Protectionsoft start,DC,short circuit,over load,clip limit,
over heat,progressive volume
Connector
InputXLR-F, XLR-M
OutputBinding posts & NL4 SPEAKON
Function
Front panel indictorSTY,power,signal,clip,protection,parallel,bridge
Front panelpower switch,volume control knob
Rear panelstereo/paralle/bridge switch,input sensitivity switch
soft clipping switch
Dimension/Weight
Product dimension483×505×89 mm
(W×D×H)(mm)
Packing dimension620×585×170 mm
N.W.15.0kg
G.W.17.5kg
PowerNon-removable power cord AC220V/50Hz.±10%


Remark:

  1.  *The power is tested under EIA standard.

  2. **The power is tested under the condition of 40ms burst, 1kHz sine wave and 1% THD.

  3.   Other data is tested under Q/TPA 1-2008 standard.

  4.   TPA reserves the right to make changes in specification without prior notice. The final specification is subject to the user manual.


How can we help?

If you have an audio project, whether that's a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details.