- Info
- Specifications
- Drawings
- Recommended Amplifier
| Audio | |
| Analog Input | 2×XLR electronically balanced |
| Analog Output | 4×XLR electronically balanced |
| Digital Input | 2 SPDIF, Gain 0dBu |
| Minimum Load | 150 ohm |
| THD+N | 0.001% at 1KHz 0dBu |
| S/N | >110dBA |
| Frequency response | 20Hz-20KHz,-0.5dBu at 20Hz and 20KHz |
| AD/DA Converters | 1×AK5388 24bit, 2×AK4396 24bit |
| DSP & Processing | |
| DSP Engine | 2×Dream SAM3716, 24bit(data)×96bit(coeff.) |
| DSP Resolution | 24×24 bit for filtering process; |
| 96 bits resolution on intermediate computation results | |
| Parametric Equalization | 30 filters per input selected as Bell or Shelving |
| 7 filters per output selected as Bell or Shelving | |
| Filter Type | Bell,1st/2nd Order Shelvings with -3dB at cutting Freq.; Symmetrical Shelving with |
| variable Q; HiPass/LowPass with variable Q, 1st/2nd Order; All Pass(90°×180° Phase | |
| rotation at cutting freq.), BandPass and Notch | |
| Filter Gain | From -15dBu up to +15dBu by 0.5dBu resolution steps |
| Center Frequency | Selectable with a 1/24th of octave resolution step from 20Hz up to 20KHz |
| Filter Q/BW | Q from 0.3 up to 20 by 0.1 resolution steps, BW from 4.8 up to 0.009 |
| Crossover section HPF/LPF | Butterworth 6/12/18/24dB per octave |
| Bessel. Linkwitz-Riley 12/24dB per octave | |
| Filter resolution 1/24th of octave | |
| RMS Limiter | Threshold from 20dBu up to -10dBu |
|
Attack time from 5ms up to 200ms(1ms resolution up to 20ms, 10ms resolution up to 100ms and 20ms resolution up to 200ms) | |
| Release time from 0.1 sec up to 3 sec(0.1 sec resolution) | |
| Ratio from 1:1 to 32:1(Compressor only) | |
| Adjustable Soft or Hard Knee(Compressor only) | |
| Delay | 270ms 10.4us increment/decrement steps per output channel only |
| General | |
| Device Presets | 32 User Presets + 8 Memory Card |
| Front Panel | 2×24 character LCD display with white/blue LED backlight |
| 7-LED meter per input channel -20dBu to +15dBu, clip | |
| 7-LED meter per output channel -15dBu to +15dBu, clip and limit mode | |
| Red/Blue LED(Edit/Mute) per channel | |
| PM1/ENTER, PM2/ESC, PM3/UTILITY rotary encoder push buttons | |
| EDIT/MUTE push button per channel | |
| PC Card reader | |
| USB type B connector | |
| Rear Panel | 2×XLR female connector(Input) |
| 4×XLR male connector(Output) | |
| 1×RCA connector(SPDIF Input) | |
| 1×RJ45 for RS485 In/Out connection | |
| 1×RJ45 for Ethernet connection(10/100 TCP-IP) | |
| IEC C13 16A connector, Power on/off switch | |
| Main AC | 90-240V AC(50/60Hz)-40W |
| Dimension | 19"×1.75"×9"(483×44×229mm) 1RU |
| Weight Net/Shipping | 7.71 lbs(3.5Kg)/8.82 lbs(4Kg) |
Facebook
Twitter
youtube
LinkedIn
Tel: +86 20 34739223
E-mail: